Yantai Funaike Heat Exchanger Co.,Ltd.

Products

Aluminum Plate-bar Radiator

Engineer Machinery Series

Home>Products>Aluminum Plate-bar Radiator>Engineer Machinery Series
Truck-1301100-300HP

Truck-1301100-300HP


Aluminum Plate-bar Heat Exchanger for Bus
  • Feature
  • Parameters

Feature

Aluminum Plate-bar Heat Exchanger for Bus

Parameters

Aluminum Plate-bar Heat Exchanger for Bus 
Model1301100-300HP
ParametersRadiator Core Size:900*120*750            
Radiator Core Size:400*60*800                     
Core Size: 1300*300*800                          
Engine: Yuchai(60KW/2300rpm)                                  
Fan: Sucked                                        
Heat Exchanger:125KW                               
Operation Pressure: 0.1mpa                      
Operation Pressure:0.2mpa
Feature/StructurePlate-bar structure with water radiator /intercooler structure . 
The advantage is compact structure,surface area can be 1000~2500m/m because of expansion of plate-fin heat exchanger with the quadratic surface.                               
ApplicationApplcaition to bus
AdvantageWith High Efficency of Heat Transfer;
Well adapted,Plate-fin heat exchanger can be applied to: gas - gas, gas-liquid and liquid-liquid;
Pressure Strength Resistant Capability is high.(Max 4.0Mpa);
Low temperature resistant capability is strong(Ambient Tem.-65°C);
Fin lodging resistance capability is strong, easy to maintain, flush.
Maintenance
1.Regularly check internal medium quality of heat exchanger,if there is particles、floc matter etc, need exchange in time; 
2.Regularly check outside channel of heat exchanger,if there is any jam,need high pressure air purge;
3. If heat transfer performance fall largely,please stop and check;
4.The vibration of equipment during the operation may cause connection bolt loose. 
Therefore, the connection position should be checked every three months. 
5.The equipment must be operated under design pressure, overpressure operation is forbidden.