Yantai Funaike Heat Exchanger Co.,Ltd.

Products

Aluminum Plate-bar Radiator

Aviation Service Equipment

Home>Products>Aluminum Plate-bar Radiator>Aviation Service Equipment
Aviation-BLR470-C

Aviation-BLR470-C


Aluminum Plate-bar Heat Exchanger for Aviation Service Equipment
  • Feature
  • Parameters

Feature

Aluminum Plate-bar Heat Exchanger for Aviation Service Equipment

Parameters

Aluminum Plate-bar Heat Exchanger for Aviation Service Equipment
ModelBLR470-C
 ParametersCore Size: 495X678X100mm                             
Core Size: mm                                       
Type of drive:  Electric Fan                                           
Fan:  Sucked                                         
Heat Exchanger: Water 50KW   Oil 5KW                                      
Radiator Operation Pressure: 0.3mpa                 
Oil cooler Operation Pressure :2mpa                     
Feature/StructurePlate-bar structure with water radiator / oi了structure . 
The advantage is compact structure,surface area can be 1000~2500m/m because of expansion of plate-fin heat exchanger with the quadratic surface.                               
ApplicationApplication to aviation service equipment
Advantage
With High Efficency of Heat Transfer;
Well adapted,Plate-fin heat exchanger can be applied to: gas - gas, gas-liquid and liquid-liquid;
Pressure Strength Resistant Capability is high.(Max 4.0Mpa);
Low temperature resistant capability is strong(Ambient Tem.-65°C);
Fin lodging resistance capability is strong, easy to maintain, flush.
Maintenance1.Regularly check internal medium quality of heat exchanger,if there is particles、floc matter etc, need exchange in time; 
2.Regularly check outside channel of heat exchanger,if there is any jam,need high pressure air purge;
3. If heat transfer performance fall largely,please stop and check;
4.The vibration of equipment during the operation may cause connection bolt loose. 
Therefore, the connection position should be checked every three months. 
5.The equipment must be operated under design pressure, overpressure operation is forbidden.