Aluminum Plate-bar Radiator
Engineer Machinery Series
-
Feature
-
Parameters
Feature
Aluminum Plate-bar Heat Exchanger for Excavator(6.5mt)
Parameters
| Aluminum Plate-bar Heat Exchanger for Excavator(6.5mt) | ||
|---|---|---|
| Model | CT65A | |
| Parameters | Core Size: Water 536*658*70mm Oil 560*649*80 Core Size: 756*725*455mm Engine: YANMAR(54.3KW/2200rpm) Fan: Sucked Heat Exchanger: Water 23㎡ Oil 20㎡ Radiator Operation Pressure: 0.2 mpa Hydraulic oil Operation Pressure: 1.6 MPa | |
| Feature/Structure | Plate-bar structure with water radiator /oil cooler structure . The advantage is compact structure，surface area can be 1000~2500m/m because of expansion of plate-fin heat exchanger with the quadratic surface. | |
| Application | Application to excavator 6.5 mt | |
| Advantage | With High Efficency of Heat Transfer；Well adapted，Plate-fin heat exchanger can be applied to: gas - gas, gas-liquid and liquid-liquid；Pressure Strength Resistant Capability is high.(Max 4.0Mpa)；Low temperature resistant capability is strong(Ambient Tem.-65°C)；Fin lodging resistance capability is strong, easy to maintain, flush. | |
| Maintenance | 1.Regularly check internal medium quality of heat exchanger，if there is particles、floc matter etc, need exchange in time； 2.Regularly check outside channel of heat exchanger，if there is any jam，need high pressure air purge; 3. If heat transfer performance fall largely，please stop and check； 4.The vibration of equipment during the operation may cause connection bolt loose. Therefore, the connection position should be checked every three months. 5.The equipment must be operated under design pressure, overpressure operation is forbidden. | |
