Air Cooler（Stainless-Steel,Carbon Steel）
Electric Power
-
Feature
-
Parameters
Feature
Air Cooler For Electric Power 3
Parameters
| Air Cooler | ||
|---|---|---|
| Dscription | DL Electric Power | |
| Parameters | External Size：0.5×1 m - 4×12m Ventilated Type：Forced Type of Drive： Electric motor Operating Pressure(Mpa)：0.01-1.0 | |
| Feature/structure | Heat Rejection Module：Flat Tube (Brazing) Tube Rows：2rows Layout：Vertical、Oblique | |
| Application | Low-pressured steam consendate、circulating water cooling | |
| Advantage | Single row tube and multi-row tube structure with down-flow and reverse flow ， it has resoved the problem which tube bundle freezing in winter time in cold region. It's remarkable for energy conservation and emission reduction. | |
| Maintenance | 1) Raise blade angle in summer according to engine load to increase air flow. Blade and bolt must be tightened after adjusting the angle. 2) Remove the dirt and foreign matters between fin plates annually. As to gas tubes bundles, remove the foreign matters through process port according to the local temperament, to avoid affecting heat exchange effect of fin-and-tube. 3) Check bolts of each part for loose once every 3 months. 4) Do not allow excessively pressure running. 5) As to operation and maintenance for motor and fan, please refer to their instructions. | |
