Yantai Funaike Heat Exchanger Co.,Ltd.

Products

Aluminum Plate-bar Radiator

Engineer Machinery Series

Home>Products>Aluminum Plate-bar Radiator>Engineer Machinery Series
Bus-G2KE2-10201Y2B

Bus-G2KE2-10201Y2B


Aluminum Plate-bar Heat Exchanger for Forklift
  • Feature
  • Parameters

Feature

Aluminum Plate-bar Heat Exchanger for Forklift

Parameters

Aluminum Plate-bar Heat Exchanger for Forklift
ModelG2KE2-10201Y2B
ParametersCore Size:530X48X80mm                        
Core Size: 630X48X280mm                           
Engine: ISUZU (33KW/2400rpm)                                 
Fan: Blowed                                        
Heat Exchanger:28KW                               
Water operation Pressure: 0.2mpa                     
Oil operation Pressure :1mpa
Feature/StructurePlate-bar structure with water radiator /hydraulic oil cooler / torque oil cooler structure . 
The advantage is compact structure,surface area can be 1000~2500m/m because of expansion of plate-fin heat exchanger with the quadratic surface.                               
ApplicationApplication to forklift 
AdvantageWith High Efficency of Heat Transfer;
Well adapted,Plate-fin heat exchanger can be applied to: gas - gas, gas-liquid and liquid-liquid;
Pressure Strength Resistant Capability is high.(Max 4.0Mpa);
Low temperature resistant capability is strong(Ambient Tem.-65°C);
Fin lodging resistance capability is strong, easy to maintain, flush.
Maintenance1.Regularly check internal medium quality of heat exchanger,if there is particles、floc matter etc, need exchange in time; 
2.Regularly check outside channel of heat exchanger,if there is any jam,need high pressure air purge;
3. If heat transfer performance fall largely,please stop and check;4.The vibration of equipment during the operation may cause connection bolt loose. 
Therefore, the connection position should be checked every three months. 
5.The equipment must be operated under design pressure, overpressure operation is forbidden.