Yantai Funaike Heat Exchanger Co.,Ltd.

Products

Aluminum Plate-bar Radiator

Mining Machine

Loader-GM650

Loader-GM650


Aluminum Plate-bar Heat Exchanger for Loader
  • Feature
  • Parameters

Feature

Aluminum Plate-bar Heat Exchanger for Loader

Parameters

Aluminum Plate-bar Heat Exchanger for Loader
ModelGM650
ParametersCore Size: 620*560*100mm                               
Core Size: 750*680*192mm                          
Engine:  WEICHAI(63KW/2200rpm)                                  
Fan:  Blowed                                       
Heat Exchanger:  Water 17.68㎡  Oil 12.35㎡
Radiator Operation Pressure: 0.16mpa                    
Oil Cooler Operation Pressure: 1.6mpa              
Feature/StructurePlate-bar structure with water radiator /hydraulic oil cooler structure . 
The advantage is compact structure,surface area can be 1000~2500m/m because of expansion of plate-fin heat exchanger with the quadratic surface.                               
ApplicationApplication to loader
AdvantageWith High Efficency of Heat Transfer;Well adapted,Plate-fin heat exchanger can be applied to: gas - gas, gas-liquid and liquid-liquid;Pressure Strength Resistant Capability is high.(Max 4.0Mpa);Low temperature resistant capability is strong(Ambient Tem.-65°C);Fin lodging resistance capability is strong, easy to maintain, flush.
Maintenance1.Regularly check internal medium quality of heat exchanger,if there is particles、floc matter etc, need exchange in time; 
2.Regularly check outside channel of heat exchanger,if there is any jam,need high pressure air purge;
3. If heat transfer performance fall largely,please stop and check;
4.The vibration of equipment during the operation may cause connection bolt loose. 
Therefore, the connection position should be checked every three months. 
5.The equipment must be operated under design pressure, overpressure operation is forbidden.