Yantai Funaike Heat Exchanger Co.,Ltd.

Products

Aluminum Plate-bar Radiator

Engineer Machinery Series

Home>Products>Aluminum Plate-bar Radiator>Engineer Machinery Series
Excavator-SY135C9I3KA

Excavator-SY135C9I3KA


Aluminum Plate-bar Heat Exchanger for Excavator(13.5mt)
  • Feature
  • Parameters

Feature

Aluminum Plate-bar Heat Exchanger for Excavator(13.5mt)

Parameters

Aluminum Plate-bar Heat Exchanger for Excavator(13.5mt) 
ModelSY135C9I3KA
ParametersCore Size: 810X880X125mm                               
Core Size: 1142X925X600mm                        
Engine: ISUZU(73KW/2000rpm)                                  
Fan: Sucked                                        
Heat Exchanger: Water 60KW Oil 50KW Intercooler 8.5KW                                      
Radiator Operation Pressure: 0.3mpa                      
Oil Cooler Operation Pressure: 2mpa           
Intercooler : 0.4mpa            
Feature/StructurePlate-bar structure with water radiator /oil cooler /intercooler structure . 
The advantage is compact structure,surface area can be 1000~2500m/m because of expansion of plate-fin heat exchanger with the quadratic surface.                               
ApplicationApplication to excavator 13.5mt 
Advantage With High Efficency of Heat Transfer;Well adapted,Plate-fin heat exchanger can be applied to: gas - gas, gas-liquid and liquid-liquid;Pressure Strength Resistant Capability is high.(Max 4.0Mpa);Low temperature resistant capability is strong(Ambient Tem.-65°C);Fin lodging resistance capability is strong, easy to maintain, flush.
Maintenance
1.Regularly check internal medium quality of heat exchanger,if there is particles、floc matter etc, need exchange in time; 
2.Regularly check outside channel of heat exchanger,if there is any jam,need high pressure air purge;
3. If heat transfer performance fall largely,please stop and check;
4.The vibration of equipment during the operation may cause connection bolt loose. 
Therefore, the connection position should be checked every three months. 
5.The equipment must be operated under design pressure, overpressure operation is forbidden.