Air Cooler（Stainless-Steel,Carbon Steel）
Natural Gas
-
Feature
-
Parameters
Feature
Air Cooler for Natural Gas
Parameters
| Air Cooler | ||
|---|---|---|
| Dscription | NT Natural Gas | |
| Parameters | External Size：0.5×1 m - 4×12m Ventilated Type：Sucked、Forced Type of Drive：Electric motor、Engine Operating Pressure(Mpa)：0.1-50 | |
| Feature/structure | Heat Rejection Module： Tube fin type (Round Tube) Tube Rows：4-8rows Layout：Horizontal、Vertical、Oblique、Heated air Circulating | |
| Application | Natural gas compressor air cooler | |
| Advantage | Finned tube with various layout is applicable to various environment. It's remarkable for energy conservation and emission reduction. | |
| Maintenance | 1) Raise blade angle in summer according to engine load to increase air flow. Blade and bolt must be tightened after adjusting the angle. 2) Remove the dirt and foreign matters between fin plates annually. As to gas tubes bundles, remove the foreign matters through process port according to the local temperament, to avoid affecting heat exchange effect of fin-and-tube. 3) Check bolts of each part for loose once every 3 months. 4) Do not allow excessively pressure running. 5) As to operation and maintenance for motor and fan, please refer to their instructions. | |
