Yantai Funaike Heat Exchanger Co.,Ltd.

Products

Aluminum Plate-bar Radiator

Engineer Machinery Series

Home>Products>Aluminum Plate-bar Radiator>Engineer Machinery Series
Skip-Steer loader-XT870D

Skip-Steer loader-XT870D


Aluminum plate-bar heat exchanger for skip 
steer loader with advantage high efficiency of 
heat exchanged and high pressure strength resistance 
capability.
  • Feature
  • Parameters

Feature

Aluminum plate-bar heat exchanger for skip steer loader with advantage 
high efficiency of heat exchanged and high pressure strength resistance capability.

Parameters

Aluminum plate-bar heat exchanger for skip steer loader with advantage 
high efficiency of heat exchanged and high pressure strength resistance capability.
ModelXT870D
ParametersCore Size: 596*711*130mm                              
Core Size: 726*800*247.5mm                         
Engine:  WEICHAI(60KW/2300rpm)                                  
Fan:  Blowed                                        
Heat Exchanger:32KW                            
Radiator Operation Pressure: 0.2mpa                    
 Oil Cooler Operation Pressure:1.6mpa              
Feature/StructurePlate-bar structure with water radiator /torque oil cooler/hydraulic oil cooler structure . 
The advantage is compact structure,surface area can be 1000~2500m/m because of expansion of plate-fin heat exchanger with the quadratic surface.                               
ApplicationApplication to Skip Steer Loader
AdvantageWith High Efficency of Heat Transfer;Well adapted,Plate-fin heat exchanger can be applied to: gas - gas, gas-liquid and liquid-liquid;Pressure Strength Resistant Capability is high.(Max 4.0Mpa);Low temperature resistant capability is strong(Ambient Tem.-65°C);Fin lodging resistance capability is strong, easy to maintain, flush.
Maintenance1.Regularly check internal medium quality of heat exchanger,if there is particles、floc matter etc, need exchange in time; 
2.Regularly check outside channel of heat exchanger,if there is any jam,need high pressure air purge;
3. If heat transfer performance fall largely,please stop and check;
4.The vibration of equipment during the operation may cause connection bolt loose. 
Therefore, the connection position should be checked every three months. 
5.The equipment must be operated under design pressure, overpressure operation is forbidden.